Scottoiler refill lubricants have been esepcially developed to both clean and lubricate your motorcycle chain. Your Scottoiler chain lubrication system will perform its best only with genuine Scottoil refill lubricants. There are two different variations of the original oil, for different purposes: Standard Blue Scottoil and High-Temperature Red Scottoil.
Available in three bottle sizes:
- 125ml (approx 4,000km of riding)
- 250ml (approx 8,000km of riding)
- 500ml (approx 16,000km of riding)
What’s the difference between Blue and Red Scottoil?
Both oils have the same chemical makeup although the High-Temperature Scottoil is more viscous and therefore slightly thicker, meaning it will flow more slowly at higher temperatures than traditional blue Scottoil. Other than that, they’re the same and can even be mixed. So if you’re changing over from one oil to the other there’s no need to drain the system and start again, they’ll blend, saving you waste.
Which one do you need?
Your choice of oils is dependent on the average riding temperatures you usually experience. Between average temperatures of 0-30°C, we recommend Standard Blue Scottoil. For higher average temperatures go for Red as it will be a more suitable lubricant on the chain and will also be easy to regulate through the vacuum operated systems. The Red High-Temperature Scottoil should be used in daily average temperatures of 20-40°C.
In some cases, we would recommend you use Red High-Temperature Scottoil if your reservoir is located near a hot spot on the engine, as this will warm the oil in the reservoir to the operating range more suited to the red oil.
Accessory filler spout is also available, OI SA0126.